6 Astonishing Remedies For Liquid inside Lightning Connector

Liquid inside Lightning Connector


What is this “The Liquid inside Lightning Connector” problem in the IOS device?

An ios alert titled “The Liquid inside Lightning Connector” shows that the charging “connector” of your device is soaked. Users can still use their phone, but until the port gets completely dry, users won’t be able to charge it using a charger cord. However, while they wait, they can use a cordless adapter. Consequently, if you are a user of an iOS device and are reportedly encountering this problem or fault, keep reading, as this post may be able to assist you.

When does this “The Liquid inside Lightning Connector” message pop up on the device?

It is one of the standards “The Liquid inside Lightning Connector” errors for the users of IOS devices. Although it is not that complicated to get a repair, it can be overwhelming while you wait for the repair to get over. So, for that, there are several methods to avoid that time consumption that a user can use to correct the problem within no time. Apple included this capability in its smartphones, a positive feature so owners may take the required precautions to avoid additional harm from the liquid.

Why has the issue “The Liquid inside Lightning Connector” been reported these days?

1.) Moisture being the Biggest Problem

IPhone device chargers are termed “Water Resistant”; however, this doesn’t mean that it is waterproof or liquid will have zero effect on the connecter. This misconception sometimes is one of the biggest reasons. The metal connectors inside the device port work on the same principle; moreover, the metal part is comparatively more vulnerable to moisture complications.

Whenever moisture affects the cord or the connecter, the device will show a red flag “The Liquid inside Lightning Connector.” The waterproof feature doesn’t always mean that it is also not affected by another fluid. This same feature is only available on iphone models or chargers of those models released, so not all iPhone users will receive these notifications.

Moisture being the Biggest Problem

Recommended reading | [Answered] Do Motherboards come with SATA Cables?

2.) Carelessness at its Peak

A careless attitude towards any procedure or a thing will only result in some problems depending on the situation. As phone users, these are pretty common but primarily overseen ones. A significant portion of this moisture lands on your charger’s connecter because of an apathetic attitude towards the maintenance of the device. A defective port or charger, a chemical spill or its particles, a hard fall to the ground, and many other things can also damage the connecter.

3.) Malfunctioning of the Lightning Port

Even though the user’s device’s charger is clean in some circumstances, they might still receive the wet port warning “The Liquid inside Lightning Connector.” User’s iPhone’s wetness detectors may be confused by a pin missing from the lightning connector you’re using. There could also be a blockage within the handset that inhibits the lightning charger from making a decent connection. Maybe early damage by water is affecting the circuits inside the connecter. It can be a manufacturing defect, too, since the moisture cannot be solely considered the primary problem.

How can we fix the Problem without Many Complications?

1.) Dry out your device’s connecter

First, this is one of the most common methods to correct “The Liquid inside Lightning Connector” any moisture problems on the connecter. The only thing the method demand it’s a little patience of the user and a clean Rag. These are the following steps to correct it:

  • Please unplug your connecter, leave it for some time
  • Clean your device as well as the connecter with a clean rag or cloth
  • Then again, please leave it to dry out
  • After 1 hour, connect the charger to confirm if it is working.
  • It will charge without any problem.

2.) Use a Connector Cap

Let’s say your iOS Device is affected by a kind of moisture or “The Liquid inside Lightning Connector” pops up, more specifically water, so next time, the user should take precautions not to connect a charger with moisture on it. Also, the user should use an authentic and clean Connector Cap to avoid faults in the cable. At the same time, it should be there when not charging. It is the biggest mistake a user can make since it can damage your port’s inner circuits resulting in permanent damage.

Use a Connector Cap

3.) Don’t Use any Artificial Source of Heat

Well, this is a silly mistake every use or make while correcting this error. Any artificial heat source, such as a hair dryer or hot heated machine, is usually not recommended to dry out the Connector. It can affect the cable or the circuits inside the Connector. The user must be patient to let it dry at room temperature or at least put it where sunlight can hit the charger.

4.) Use MagSafe wireless charger

Although it functions differently, Iphone also offers MagSafe innovation. Instead, Apple introduced a ring of magnets around the Qi-based wireless power coils, allowing for a tighter fit and speedier charging.

Wireless charging is a must-have feature for your device. Remove all objects between the charger and the device.
Orient the iPhone’s screen upward when placing it on the Mag-Safe Charger. The indicator pops up when the smartphone begins to charge.

5.) Reboot the Device after cleaning the Connector

The easiest and one of the most common methods is to restart or reboot the device after cleaning the Connector out.

  • Clean the charger (Connector)
  • Restart the device and again connect with the charger.
  • It will automatically start the charging process.

6.) Take it to an Apple Store

You’ll have no choice but to consult an expert if the previously mentioned techniques do not work. If the phone displays “Liquid detection in Lightning Connector,” avoid opening it or prodding anything. Allow the authorities to handle the situation. It will correct the “The Liquid inside Lightning Connector” problem.

Take it to an Apple Store

FAQS on “The Liquid inside Lightning Connector” problem

Is there an efficient method to correct this problem?

The most efficient method is to dry out the device at room temperature.

What precautions are to be taken for this problem?

First, use a dry and clean rag to remove moisture from the Connector, and have patience.

What if the problem stills persist?

The indicator light might blink, or the charging port will not work.


The charging Connector of your device may be affected by moisture, according to an iOS alert titled “The Liquid Inside Lightning Connector.” Users can still use their phones, but they won’t be able to charge them with a charger cord until the port is completely dry. A user can correct the problem by using one of several methods to avoid that time consumption.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top